How long is the life of the metal laser marking machine?

Metal laser marking machine

As an application-type machine, the laser marking machine will have a certain loss in the operation process. As the use time is longer, the operation capacity will also be reduced to a certain extent, so the service life of a fiber laser marking machine is For many years, many customers who want to buy laser marking machines and those who are using laser marking machines will want to know this question.
First of all, as the central component of the laser marking machine, the quality of the laser directly affects the operating efficiency of the entire laser marking machine. Usually, the laboratory data of laser life is 100,000 hours. It can be calculated based on 24 hours a day for 11 years. It can not be marked on the workpiece due to the attenuation of the laser. It can be used for six years based on the laser output of 40%.
Of course, this is the theoretical data of the laboratory. It will be different from the actual production environment and application level of the laser marking machine. According to customer data, most fiber laser marking machines have been used at the user site for 5 years, and they are currently in operation. Outstanding.
Develop outstanding operating habits and regular maintenance of the machine, which can improve the service life of the fiber laser marking machine to a certain extent. The following summarizes a series of specific methods for the protection and maintenance of the fiber laser marking machine.
1) When the machine is not in operation, the power supply of the marking machine and the accounting machine should be blocked.
2) When the machine is not in operation, cover the field lens cover to prevent dust from polluting the optical lens.
3) When the machine is working, the circuit is in a high-voltage condition. Non-professionals should not overhaul it when it is turned on to avoid electric shock.
4) Any failure of this machine should immediately block the power supply.
5) When the equipment is used for a long time, the dust in the air will adsorb the UV laser marking machine on the lower end surface of the focusing lens. The lighter ones will reduce the power of the laser and affect the marking effect. The more serious ones will cause the optical lens to absorb heat and overheat and cause bursting. When the marking effect is not safe, you should carefully check whether the surface of the focusing mirror is contaminated.